Key Facts
| Guided learning hours | 120 in total under the AQA, OCR and Pearson Edexcel specifications |
|---|---|
| Report length (AQA, OCR) | Approximately 5,000 words where the product is a written report or dissertation; at least 1,000 words of written work alongside an artefact |
| AQA weighting | AO3 Develop and Realise carries 40% of the marks; AO2 Use Resources carries 20% |
Figures correct at the time of writing. Confirm current fees and deadlines with the school or university directly.
University Application Tutoring: how one-to-one tuition works and what it costs
The best EPQ ideas for engineering are questions that name a specific device, structure or design decision and can be answered with evidence a sixth-former can gather or find, such as a test result, a published standard or a manufacturer datasheet. A title like "How does truss geometry change the load a model bridge carries?" gives the project a variable, a method and an end point, whereas a title like "Renewable energy" gives it none of the three.
AQA, Pearson Edexcel and OCR all let an engineering project take the form of a research report, an investigation or a built artefact, which the school marks and the board then moderates. Deciding which form suits the question early shapes the sources, the equipment and the evidence the project will produce.
What does the EPQ ask of an engineering project?
The EPQ asks an engineering student to plan, research, carry out and review one self-directed project whose final product is a research report, an investigation or an artefact. AQA (7993) describes the product as a research-based written report, or an artefact accompanied by a written report, and asks for a production log recording the proposal, research, advice taken, changes of plan and a review. Pearson Edexcel offers dissertation, investigation or field study, performance and artefact units, and lists solving an engineering or construction problem among its artefact examples. OCR (H856) lists a report of an investigation, a dissertation, an artefact and a performance or event.
All three boards assess four areas: managing the project, using resources, developing and realising the outcome, and reviewing it. The school marks the work and the board moderates, with AQA describing a moderator who re-marks a sample of the school's marking. For an artefact, AQA allows photographs of each stage of development and of the final product to stand in for large objects, so a bridge or a test rig does not have to be handed in.
What are good example engineering EPQ titles?
Good engineering EPQ titles are questions that one student can answer with evidence, and the examples below are illustrations written for this article, not past student projects. They are grouped by the form of project, with a line on what makes each workable. Each can be adapted to civil, mechanical, electrical, materials or environmental engineering by changing the system under study.
- Research report: To what extent do tuned mass dampers reduce wind-induced sway in tall buildings compared with added structural stiffness? Workable because published case studies and design guidance supply comparable figures.
- Research report: Which factors most limit the recycling of wind turbine blades, and which design changes address them? Workable because institution reports, industry studies and material datasheets give several positions to weigh.
- Research report: Should flood protection for a UK river town favour hard defences or natural flood management, judged on published performance evidence? Workable because Environment Agency data and case studies allow a comparison of two named options.
- Investigation: How does the infill pattern of a 3D-printed beam affect its failure load in a three-point bend test? Workable because one variable is changed, the test is repeatable and the results can be set against beam theory.
- Investigation: How does the tilt angle of a solar panel affect its logged output over a day at one fixed site? Workable because a voltage and current logger gives numerical data, which can be compared with Met Office irradiance records.
- Investigation: How does truss geometry affect the load a balsa bridge of fixed mass carries before failure? Workable because the models are cheap to repeat, and the failure point is easy to identify and photograph.
- Artefact: Can a low-power sensor and microcontroller log soil moisture reliably enough to guide watering in a school greenhouse, judged against manual checks? Workable because the success criterion is set at the start and tested against a reference.
- Artefact: Can a fan and flow straightener produce airflow even enough to compare the drag of three model shapes? Workable because uniformity can be measured, and the build supports a second stage of testing.
- Artefact: Can a hand-built regenerative braking module recover a measurable share of the energy of a small model vehicle? Workable because the energy in and out can be calculated, with the limits of the design discussed in the report.
University Admissions tutors
Mark
Master TutorI have thirty years in education, including Head of English at an independent school and GCSE and A-Level examiner. I teach English, Literature, Language, Creative Writing and Critical Thinking, ages four to eighteen. I start from what a student can already do and adapt my methods to them.
Enquire about this tutorJohanna
Expert TutorI have two decades' teaching experience in English Literature, English Language and Philosophy, and hold a PhD in English Literature. I teach GCSE, A-Level, Oxbridge entrance and UCAS personal statements. My approach is person-centred, working through dialogue and ongoing assessment.
Enquire about this tutorOwen
Expert TutorI gained an MA and MPhil at Girton College, Cambridge, and am a British Council certified counsellor. I specialise in Oxbridge preparation and university admissions, and teach A-Level English Literature, French and German, using the discursive, oral-first style of an Oxbridge supervision.
Enquire about this tutorHow do you narrow a broad engineering interest into a question?
Narrowing a broad interest means moving down from a field to a component or decision, then adding a variable, a comparison or a judgement that someone could reasonably dispute. A worked example starts with the topic of renewable energy, narrows to wind power, then to small turbines, then to blade design, and arrives at the question: how does blade pitch angle affect the electrical output of a small three-bladed turbine tested in front of a fan at a fixed setting? Each step removes a branch of engineering the student does not have time to cover.
Five checks test whether a question is the right size, and a question that fails two or more usually needs trimming or widening. If it is too wide, fix one variable, one site or one technology. If it is too narrow, add a second variable or a comparison with published values.
- Can the answer be stated in one sentence that contains a finding?
- Can the student collect or locate the evidence with the equipment and supervision available?
- Could a reasonable engineer argue for a different answer?
- Is there published work or a standard against which the results can be compared?
- Does the question lead to one product, whether a report, a set of results or a prototype?
Where can a sixth-former find sources for engineering projects?
Sixth-formers can find engineering sources in professional institution publications, standards summaries, open datasets, manufacturer datasheets and university or public libraries. The Institution of Mechanical Engineers, the Institution of Civil Engineers, the Institution of Engineering and Technology (IET) and the Royal Academy of Engineering each publish reports, magazines or case studies, and some material in their libraries may sit behind a membership or institutional login that a school can sometimes provide.
British Standards are published by BSI, and the summaries on its website describe what a standard covers, which is often enough to cite the scope of a test method or design requirement; the full text usually needs a library or subscription route. Open datasets from the Met Office, the Environment Agency and the Department for Energy Security and Net Zero supply real weather, river and energy figures to analyse, while manufacturer datasheets give the ratings and tolerances of the components inside an artefact.
Google Scholar and a school or university library can point to peer-reviewed papers on the same question. A source list that mixes an institution report, a standard, a dataset and a datasheet usually shows more range than one built from websites alone.
How should an engineering artefact be planned?
An engineering artefact is planned around a testable claim, a design log and a written report, because the product alone does not show the research and evaluation the boards assess. AQA requires a research-based written report alongside an artefact, and the production log records progress; a design log of sketches, calculations, versions and failed attempts can feed that record. Each prototype needs test results against a criterion set at the outset, such as a load carried, a running time or a measured tolerance.
Safety and budget are settled with the supervisor before building starts. A risk assessment covering tools, battery or mains power, heat and materials usually needs the school's agreement, and a budget fixed at the proposal stage, with a list of parts, shows what the prototype can realistically include. Where a physical test would be hazardous, a simulation or published data may replace it, with the reason recorded in the log.
The accompanying report usually covers the research behind each design choice, the test method, the results, the limitations and an evaluation of the product against the original criteria. Dated photographs of each stage matter, since AQA accepts photographs and other media as evidence of a large or fragile build.
How is the EPQ used in an engineering application?
Universities treat the EPQ differently, and each one's own page sets the rule. Queen Mary University of London may make a dual offer to applicants taking an EPQ alongside three A-levels, expects a predicted grade in the EPQ, and states that the EPQ will not compensate for a shortfall against its minimum A-level requirements. Birmingham may make an alternative offer to applicants taking the EPQ, applying only where Birmingham is the firm choice.
Those pages are general admissions pages, so the entry requirements page of the specific engineering course governs for that course. Whatever a university's policy, the project supplies material for the personal statement and interview: a design log entry showing a decision and its reason, a test result that contradicted a prediction, and a written evaluation of what the student would change. No page cited here says an EPQ secures an offer.
Which engineering EPQ title patterns should be avoided?
Weak engineering titles tend to follow a handful of patterns that leave no question to answer, and each can usually be repaired by adding a variable, a comparison or a success criterion.
"Building a robot arm" becomes "Can a servo-driven arm built from school-available parts repeat a placement to within a stated tolerance?", which supplies the test the original title lacks.
- A bare topic such as "Robotics" or "Renewable energy", which has no variable or argument.
- "The history of" a machine or technology, which tends to produce description with no judgement.
- "Is X the future of transport?", a prediction that the available evidence cannot settle.
- A build with no test, so the finished object has no criterion to be judged against.
- Titles that depend on equipment, sites or materials a student cannot safely or legally reach, such as high-voltage systems or hazardous chemicals.
- Titles that restate the A-level syllabus, such as explaining how a moment or a circuit works.
Related guides
- TMUA tutors
- Engineering super-curricular activities
- ESAT guide for engineering and science
- EPQ ideas and examples
- The EPQ as evidence in university applications
- University application tutoring
Tutoring with Taylor Tuition
Families who come to us for this stage usually want a tutor who can diagnose where the marks are being lost and then build a steady routine around it, and that is how our programmes are set up. Our tutors are drawn from a pool in which more than half hold Qualified Teacher Status, around three in five hold a master's degree or doctorate, and which includes former heads of department, exam-board examiners and teachers from independent and boarding schools.
Sessions run online for families across the UK and internationally, and in person in central London. Fees start from £50 per 50-minute session and depend on tutor level and subject. There is no registration fee. Every tutor who works with children holds an enhanced DBS check and families receive progress reports after sessions.
Frequently asked questions
- Does an engineering EPQ have to involve building something?
- No. AQA, Pearson Edexcel and OCR all allow a research report, and Pearson and OCR also list an investigation or field study among their forms. A build suits students who want to test a design, but it brings safety, budget and a written report on top of the prototype. A sound research report or investigation can be equally well suited to an engineering question.
- Do universities include the EPQ in engineering offers?
- Policies differ by university. Oxford says an EPQ will not form part of an offer, Queen Mary University of London may make a dual offer that includes it, and Birmingham may make an alternative offer where it is the firm choice. The entry requirements page of the specific engineering course is the place to check.
- How can you tell if your engineering EPQ question is too broad?
- A question is usually too broad if it names a whole field, cannot be answered in one sentence with a finding, or needs evidence the student cannot collect. Fixing one variable, one site or one technology usually narrows it. Checking whether a reasonable engineer could disagree with the answer also shows whether the question can be argued.
- Where can you find sources for an engineering EPQ?
- Useful sources include publications from the Institution of Mechanical Engineers, the Institution of Civil Engineers, the IET and the Royal Academy of Engineering, BSI summaries of British Standards, open datasets from bodies such as the Met Office and the Environment Agency, manufacturer datasheets, and papers found through Google Scholar or a university library.
- What goes in the written report that accompanies an engineering artefact?
- AQA requires a research-based written report with an artefact, and Pearson Edexcel and OCR expect supporting evidence of research and review. The report usually covers the research behind design choices, the test method, results, limitations and an evaluation against the original success criteria. Dated photographs and a design log support the evidence.
Enquire about admissions support
Start your enquiryHow Taylor Tuition can help
Expert, one-to-one support from specialist tutors.
Editorial Notice
We use automated research tools to help collate and maintain information across our website. While each post is reviewed before publication, some details may be incomplete or inaccurate.
Taylor Tuition
Educational Consultancy
Contributing expert insights on education, exam preparation, and effective learning strategies to help students reach their full potential.
